As you drive or walk along cabro paving grounds, you undoubtedly get amazed at the exquisite beauty displayed by those magnificent materials. In Kenya, concrete cabro pavings are becoming very famous for pavement surfacing, especially when people notice how long-lasting and beautiful they are. Looking at materials used to make cabros, like cement, gravel, sand, and water, and the manufacturing procedure of compaction, condensation, and sun-drying, it's enough proof that cabros are durable. Prices vary from one material to another or even from one shop to another. You may need to look for concrete cabro sellers near you that you can easily visit to do a pre-visit before purchasing. After assembling the required materials, get yourself an expert that knows how to make cabro surfaces that won't fail. If a professional cabro fitting specialist correctly does them, they will withstand excessive water from penetrating the ground, becoming waterproof. You may need to find an expert who knows how to fix concrete cabros because, with the high demand of people wanting to use cabros, there are inexperienced so the work may be faulty. This explains why you need to understand a few concepts for laying concrete cabros before fixing them. We will consider quite a number of them.
CHECK for CABRO FITTING EXPERTS nearest you OR Post a CABRO FITTING JOB & receive bids via email!
The Standard Procedure for Laying Concrete Cabros
1. Preparation for the Cabro Installation Process
Any other proper idea should start with preparation before the construction process, and cabro installation is not an exception. There are several factors to consider before installing cabros, including determining the cost of cabro blocks. In Kenya, for instance, the non-colored cabros cost ksh. 850 per square meter, whereas the colored blocks cost ksh 1200 per square meter. (Note that this is indicative and there are factors that may influence the exact cost and may vary from one seller to another). So before settling for a specific color, decide on the amount you wish to spend on purchasing materials first. Look for an affordable concrete cabro seller near you, then settle on one. For the installation process, you may need a trusted expert and a professional to help you fix cabros. Establish the location where you need the cabros fixed, then discuss with your cabro installation expert the convenience of the area.
2. Excavation of the Ground Where Cabro is to Be Installed
After proper calculation, start the process by preparing that location. This kind of preparation may require first clearing the ground where you need the cabros to be installed. If the area is grassy, you probably will start by clearing bushes around the room. Prepare enough handymen to help clear the area, according to your preference. If the site is rocky, remove the rocks to prevent them from breaking the cabros once installed. Dig off every unwanted material that could interfere with the construction process and dispose of the spoil left for environmental management purposes. Since the installation materials are meant to be permanent, you may want to establish the site in a place where there would not be any future construction taking place.
3. Prepare a Sub-base for Cabro Fitting
In engineering terms, a sub-base is the layer of aggregate material laid on the subgrade, on which the base course layer is located. So after the excavation process, a sub-base is placed on a flat surface. Make sure the area is leveled first before laying the sub-base. Cover them with stone dust or grit sand if there are any voids. The base should be 100mm thick to serve its purpose of spreading the load evenly over the subgrade. Materials used for sub-base may include unbound granular, crushed stones, slug, concrete, or slate. This process is necessary, especially for pathways used by vehicles.
4. Establish Edge Courses and Curbs for Cabro
Curbs are those boundaries constructed of cut stone or cement concrete slabs to act as barriers across the cabros. These curbs/kerbs are constructed 100mm above the road surface. The relevance of curbs includes preventing vehicles from parking beside the road, acting as a boundary wall between the footpath and pavement, providing support to the pavement, helping to combat accidents, especially those that may occur as a result of passing across them, and are also used for drainage purposes among others. After precisely placing the curbs, use enough material to lay the barriers first before fixing the cabros. This is important as it will help the installation expert specifically know where they need to cut the cabro for the edges for uniformity.
5. Identify a Proper Concrete Cabro Laying Course
A laying course is the final layer of aggregates installed directly over the sub-base. These paving units will help cover the aggregated surface, and since this final layer has a more delicate texture than the latter, it will ensure that the finished surface is smooth and even. The laying course bed should be between 20-50mm thick and nothing more. If you are looking for a long-term structure, which I believe you are, you need to establish these measurements correctly and use suitable materials. You can have the best concrete cabro installation when you follow the correct procedure, but if you don't know how to go about it, the results may not be as expected. The tight process should include spreading/ leveling the compact laying course with sand and screed. Create a smooth surface to lay the bricks.
6. Include Block Laying for Cabro Durability
Block laying is not as tough as the previous processes of laying the foundation since this one is the final part of fixing the cabro blocks/ After deciding on the color and material of the cabro of your liking, the installation expert will then start the fixing process. To make work more accessible, have the blocks moved close to the work area because fixing may be just as fast. Establish the corners first before starting. An experienced cabro installation expert should possess a toolbox with essential measurement tools to help in this regard.
7. Find an Expert Who Has Skills in Cabro Alignment and Compliance
The alignment process is crucial since this is the final part that will give the cabros a desirable look. Once all the complete blocks have been laid, check whether the alignment process was done well, possibly by using the alignment tool, which will then balance the crooked ones right away. Labor here depends on the type of material used for cabro formation. For instance, if clay is used, they are usually made in a rectangle shape; they may need the final realignment because the body made in drifts off the line during the fixing process. On the other hand, concrete blocks are molded as perfect rectangles, so they rarely drift off. So when walking at concrete cabro shops, look for blocks that are easy to fix; they may be expensive but worth it.
8. Establish a Proper Cutting-in of the Cabro for Fitting
This process is meant for the edges which alternate the curbs. As mentioned earlier, curbs are fixed before cabros to establish boundaries. So when selecting cabro, bites may be smaller and may not fit one whole block of cabro, which is why they need to be cut-in. Correct measurements will ensure no wastage of total blocks during the cutting process. Establish how many blocks need to be cut, then use measures to cut them through as required. The user can make small edges that may not require a partnership uniform of cement.
9. Cabros Must Acquire Correct Jointing and Compaction
This one is referred to as the final process in cabro installation. This process is done by reinforcing in-situ concrete slab over a thin granular base course. This allows expansion, contraction, and warping for a durable block. This will also help in the gapping process between the slabs for the easy joining of the blocks. Others may prefer to use hands, while the cautious ones may want to use the jointing tools.
10. Make Sure There is a Successful Completion Process
As an employer, you may want to check out your cabro installation expert's work to determine areas for correction before completion. After careful consideration, ask for further direction on your installation experts go about it. Excess jointing sand is always left on the surface for the first few weeks or even topped up during the completion process, so you need to find out how long the sand stays up there. As far as payment is concerned, establish how much cabro installation experts are paid in Kenya to avoid overpaying them.
Advantages of Cabros over Other Floor Installation Materials
1. Cabros are Aesthetically Pleasing and are Design-focused
Depending on the price, texture, and style or shape, there are different types and colors of cabros that are beautiful. The good thing about this pro is that you will not be limited to one specific color, style, texture, or shape of the cabro. The options may even vary if you wish to mix colors, for instance, using different colors for pavement and different ones for your parking lot. Concrete cabro shops in Nairobi are very many, so if you lack supply in your location, the online search mechanism may help you get cabro designs of your liking.
2. Concrete Cabros are Environmentally-friendly and Sensitive
The aesthetically pleasing cabro products may also complement the environment within. Finding a color that blends in with your compound will make your combination look presentable and clean. Materials used for the construction process can be recycled, saving scarce materials and improving environmental conservation. Cabro blocks are easy to install, and so these more minor skill requirements would offer employment opportunities to those who lack work. One more advantage of this is that the durability of cabro installation would give the user minimum maintenance work.
3. Cabros are Long-lasting and Safe for Use
Cabros are durable and resistant to abrasion, high temperatures, petroleum products, and skidding. The versatility of cabros makes them ideal for both pedestrian and vehicle use. They are also safe because they are slip-resistant because have abrasion properties. This can be a safe ride even for children playing around, unlike the use of tiles which may be slippery. Using cabro materials will ensure no potholes, so minor accidents may be avoided.
4. Concrete Cabros are Very Easy to Install and Maintain
The process of installing concrete cabros, as discussed above, may seem hectic, but with suitable materials, it is easier than it looks. That makes it an advantage because the more straightforward installation process will also be affordable for one who wants to install cabros. Once a plan has been established, it is easy to fix, and there is minimum disruption too as the construction process continues. Apart from the machines used for the laying course process, the rest of the labor is usually done by hand, making it even easier.
With concrete cabro installation, you can be sure to attain aesthetic beauty for your compound. But to help you achieve that desire, you should research the basic materials needed for cabro installation, experienced cabro installation experts, and the cost of cabros near you. As we have also established that it is an easy-to-do job, cabro installation provides more employment opportunities for people with basic skills in the construction industry. You can take advantage of such opportunities and look for jobs for youths. Are you an expert in cabro installation and are looking to market your skills online and get jobs without success? As eWak, we would offer to help you get noticed by employers across the country. You only need to sign up at ewak.co.ke then, to be more helpful, follow our social media platforms.
